043. 7834986       info@nds.com.vn  
 Giá vàng 9999
 Ngoại tệ
 Thời tiết
Liên kết website
 Sản phẩm  ⇒ Máy Đo , Kiểm Định Mạng  ⇒ Wired Solutions - NetAlly

LinkRunner® AT – Network AutoTester


Kiểm tra và xác nhận kết nối Ethernet và cáp quang trong chưa đầy 10 giây.

Các tính năng chính

Tìm thông tin cổng và thông tin cổng gần nhất thông qua CDP / LLDP / EDP và xác minh tốc độ liên kết / song công và kết nối với mạng TCP / IP bằng AutoTest.

Xác thực lên tới 30W 802.3af / tại PSE bằng thử nghiệm Cấp nguồn qua Ethernet (PoE) được nạp TruePower ™.

Xác nhận chiều dài cáp xoắn đôi và bản đồ dây trong tích tắc.

Tự động báo cáo và cho phép tải lên các kết quả kiểm tra và quản lý thông qua Link-Live Cloud Service.

Kiểm tra cáp xoắn đôi / cáp đồng (kiểu máy LRAT-1000 và LRAT-2000), thử nghiệm sợi quang (chỉ loại LRAT-2000)


The LinkRunner AT Network AutoTester offers user-configured AutoTests for a wide range of important tasks. This network tester&;s quick cable test and switch identification facilitate fast problem isolation. Test results can be automatically uploaded to the Link-Live Cloud Service to improve collaboration between network engineers and technicians, creating greater job visibility, project control, and fleet management.


Two Models: LRAT-2000 and LRAT-1000

The LinkRunner AT Network AutoTester is available in two models: LRAT-2000 and LRAT-1000.

LinkRunner AT 2000 features include*:
– Fiber support
– TruePower™ PoE Power Test up to 30W
– IPv6 support
– Reflector support
– More reports: 50 instead of 10
– Uses Li-ION rechargeable battery instead of an AA battery pack

*These exclusive features cannot be added to the LinkRunner AT 1000.

Cable Length, Wiremap, and Location

Cable Location
Locate cable runs with toning, switch port advertisement, switch port link light blinking, and remote cable identifiers. Toning supports both analog and digital IntelliTone modes.

Cable Wiremap and Length

Check patch cables using the built-in wiremap port, including pin-to-pin connection, or installed wiring for length, shorts, or opens or split pairs.
Easily find opens, shorts, miswires, and split pairs three different ways:
– On non-terminated cable
– With a WireView Cable Identifier
– With the built-in wiremap port on the side of the LinkRunner AT

Discover Nearest Switch and VLAN

The LinkRunner AT uses the IEEE Link Layer Discovery Protocol (LLDP), plus the Cisco and Extreme Discovery Protocols (CDP and EDP) to display the VLAN and nearest switch model, slot, and port.

The LinkRunner AT displays critical nearest switch information includes:
– Switch name and model
– IP address
– Chassis, slot, and port
– Duplex and speed (actual and advertised)
– Signal Strength
– Connection (MDI or MDI/X)
– PoE voltage and power (actual and test limit)
– Graphical representation of power on pairs
– 1 Gig link on copper with PoE on port 30
– 1 Gig link on fiber on port 6

Packet Reflector

The LinkRunner AT packet reflector mode allows it to be used as a remote device during end-to-end network path performance tests to validate LAN and WAN throughput capabilities up to 1Gbps. The reflector mode can be configured to swap MAC and/or IP addresses.

LinkRunner AT 2000 supports packet reflection for:
– OptiView® XG Network Analysis Tablet
– OneTouch™ AT Network Assistant
– EtherScope™ Network Assistant
– MetroScope™ Service Provider Assistant
– Any device generating 802.3 frame or IP packet streams

Automated Test Results Management to Link-Live Cloud Service

Serving as a centralized test results and device management system, the complimentary Link-Live cloud service transforms team workflows with the ability to quickly and easily log, document, and report test activity from all LinkSprinter, LinkRunner AT, LinkRunner G2, AirCheck G2, and OneTouch AT hand-held network testers. Once the instrument is connected to the Link-Live Cloud Service, your test results are automatically uploaded to the dashboard for project management and reporting. You have the option of uploading additional files, screenshots, images, profiles, packet captures, location information, and comments anytime. Also, certain NetAlly instruments with AllyCare Support can receive firmware updates “over the network” from Link-Live as they become available.

An API is available to retrieve and integrate data from Link-Live into other management platforms, such as your trouble-ticket application or network management system. This gives you the ability to easily provide proof-of-performance and better manage jobs and staff efficiency.

This unified dashboard of both wired and Wi-Fi network connectivity results enables you to:
– Reduce results management overhead for multiple testers and users
– Enables seamless collaboration between site personnel and remote experts
– Simplify report generation across media types for network deployment documentation
– Attach photos, user comments to each result, adding context for future changes and troubleshooting
– For asset management, ability to associate serial numbers of installed devices, and/or cable/wall jack label to specific test

Local Reporting Mode
Alternatively, you can enable the Local Reporting Mode to facilitate saving of AutoTest results on the tester. For AutoTest results saved locally on the tester, the included MS windows-based LinkRunner AT Manager Software facilitates management and analysis of test results, test reports, and testers.

Models & Accessories


Model Number/Name Description
LRAT-1000 Includes: (1) LinkRunner AT – 1000 tester (twisted-pair copper only) with AA battery pack, 4 AA batteries, USB cable, Quick Start Guide, and small soft carrying case.
LRAT-1000-1YS 1 year AllyCare Support for LRAT-1000
LRAT-1000-3YS 3 year AllyCare Support for  LRAT-1000
LRAT-2000 Includes: (1) LinkRunner AT – 2000 tester (twisted-pair and fiber optic) with Li-ION battery, WireView wire mapper #1, RJ-45 coupler, USB cable, Quick Start Guide, and small soft carrying case. Fiber SFP must be purchased separately.
LRAT-2000-1YS 1 year AllyCare Support for LRAT-2000
LRAT-2000-3YS 3 year AllyCare Support for LRAT-2000
LRAT-2000-KIT Includes: LinkRunner AT 2000 tester with Li-ION battery, WireView wire mappers #1-#6, RJ-45 coupler, USB cable, holster, IntelliTone™ 200 Pro LAN Probe, and medium soft carrying case.
LRAT-2000-1YS 1 year AllyCare Support for LRAT-2000-KIT
LRAT-2000-3YS 3 year AllyCare Support for LRAT-2000-KIT
LINKSOLUTIONS-KIT Includes: (1) LinkRunner AT 2000 tester, (2) LinkSprinter network testers, (1) LinkRunner AT holster, and (2) LinkSprinter holsters.
LINKSOLUTIONSKIT-1YS 1 year AllyCare Support for (1) LRAT-2000 and (1) LSPRNTR-300
LINKSOLUTIONSKIT-3YS 3 year AllyCare Support for (1) LRAT-2000 and (1) LSPRNTR-300
ACKG2-LRAT2000 Includes: (1) AirCheck G2 Wireless Tester, AC charger, (2) USB cable, Quick Start Guides, external directional antenna, holster, automobile charger, (1) LinkRunner AT 2000 tester with Li-ION battery, AC charger, IntelliTone™ PRO 200, WireView Cable ID #2-6, large folding test kit pouch, holster, RJ-45 coupler,  and (2) soft carrying case.
ACKG2-LRAT2000-1YS 1 year AllyCare Support for ACKG2-LRAT2000
ACKG2-LRAT2000-3YS 3 year AllyCare Support for ACKG2-LRAT2000


Model Number/Name Description
PWR-CHARGER AC Charger replacement
WBP-LION-GREEN LinkRunner AT Lithium Ion Replacement Battery
LRAT-AA-GREEN LinkRunner AT AA Battery Pack
LRAT-HOLSTER LinkRunner AT Holster
SFP-1000SX SX Gig Fiber SFP transceiver with DDM (850 nm, Multimode)
SFP-1000LX LX Gig Fiber SFP transceiver with DDM (1310 nm, Singlemode)
SFP-1000ZX ZX Gig Fiber SFP transceiver (1550 nm, Singlemode)
SFP-100FX 100BASE-FX Fiber SFP transceiver with DDM (Multimode)
WIREVIEW 1 Wireview wire mapper #1
WIREVIEW 2-6 Wireview wire mappers #2-#6
MS-AUTO-CHG Auto Lighter Charger Adapter


Dimensions 3.5 in x 7.8 in x 1.9 in (8.9 cm x 19.8 cm x 4.8 cm)
Weight 18 oz (0.5 kg)
Battery Removable, rechargeable lithium-ion battery pack (18.5 Watt-hrs)
Battery Life Typical operating life is 6 hours; Typical charge time is 3 hours
External AC Adapter/Charger AC input 90 to 264V AC 48 to 62 Hz input power DC output 15V DC at 1.2 Amps
Display 2.8 in color LCD (320 x 240 pixels)
Keypad 12-key elastomeric
Tone Generator IntelliTone™ digital tone: [500 KHz]; analog tones: [400 Hz, 1 KHz]
Media Access; Copper RJ-45: 10BASE-T, 100BASE-TX, 1000BASE-T and PoE (IEEE 802.3af and 802.3at)
Media Access; Fiber SFP Adapter Port supports 100BASE-FX and 1000BASE-LX/ SX/ZX (LRAT-2000 Only)
Cable Tests Pair lengths, opens, shorts, splits, crossed, straight through, and cable ID
Power over Ethernet (PoE) Single ended testing:
User-defined testing to IEEE 802.3at class 0, 1, 2, 3, 4 without LLDP negation, or 4 with LLDP negotiation
The following PSE PoE parameters are measured:
Pairs used
Received class
PSE type
Unloaded voltage(V)
Loaded voltage (V) (LRAT-2000 with TruePower™)
Unloaded power (W) (LRAT-1000)
Loaded power (W) (LRAT-2000 with TruePower™)
Supporting Operating Systems Windows® 8.1 and Windows® 10
Minimum hardware requirement:
Processor: 1 GHz or better CPU
RAM: 1 GB or more
Hard Disk: 1 MB available space
Display: 1024 x 768 high color, 32-bit (recommended)
Interface: USB
Operating Temperature and Relative Humidity 32°F to 113°F (0°C to +45°C) Note: The battery will not charge if the internal temperature of the tester is above 113°F (45°C)
Operating Relative Humidity (% RH without condensation) 90% (50°F to 95°F; 10°C to 35°C) 75% (95°F to 113°F; 35°C to 45°C)
Storage Temperature -4°F to 140°F (-20°C to +60°C)
Shock and Vibration Random, 2 g, 5 Hz-500 Hz (Class 2) 1 m drop
Safety EN 61010-1 2nd edition
Safety (LR-AT 2000 only) EN/IEC 60825-1:2007, EN/IEC 60825-2:2004+ A1:2007 (LRAT- 2000 only)
Altitude 4,000 m; Storage: 12,000 m
EMC FCC Part 15 Class A, EN 61326-1
Certifications and Compliance Conforms to relevant European Union directives Conforms to relevant Australian standards Listed by the Canadian Standards Association


Title/Description Download  
LinkRunner AT Manager
LinkRunner AT v3.0 Firmware Updates


 Sản phẩm cùng loại
LinkRunner® G2 - Smart Network Tester
LinkSprinter® Máy kiểm tra mạng bỏ túi
EtherScope™ nXG
OneTouch™ AT Network Assistant