043. 7834986       info@nds.com.vn  
DANH MỤC SẢN PHẢM
 Giá vàng 9999
 Ngoại tệ
 Thời tiết
Liên kết website
 Sản phẩm  ⇒ Máy Đo , Kiểm Định Mạng  ⇒ Wired Solutions - NetAlly

LinkRunner® G2 - Smart Network Tester

 
 

Capabilities

Discover Nearest Switch and VLAN

The LinkRunner G2 uses the IEEE Link Layer Discovery Protocol (LLDP), plus the Cisco and Extreme Discovery Protocols (CDP and EDP) to display the VLAN and nearest switch model, slot, and port.

The LinkRunner G2 displays critical nearest switch information include:
– Switch name and model
– Switch chassis, slot, and port #
– Switch IP Address
– VLAN&;s supported
– Duplex and speed (actual and advertised)
– Signal strength
– Connection (MDI or MDI/X)
– PoE voltage and power (actual and test limit)

TruePower PoE Loaded Test

LinkRunner G2 is the first field tester able to validate loaded PoE performance by drawing actual power up to 802.3bt 90W across all four pairs. Load the circuit to stress switches, cabling, and patch panels, all while measuring the voltage and pairs being used. Using the TruePower test to validate the power delivery before installing IoT connected devices ensures a smooth deployment and helps to alleviate finger-pointing.

 

Get Answers Fast with AutoTest

The LinkRunner G2 Li-ION battery can be charged via PoE and can power up in standby mode within a second. Enhanced, user-defined AutoTest can perform a required set of connectivity tests within seconds. The LinkRunner G2 Smart Network Tester enables you to quickly and accurately validate network health, and solve problems fast.

– PoE loaded test up to 90W
– Link speed and duplex (actual and advertised)
– RX pair, polarity, and signal level
– 802.1x authentication
– Discover the nearest switch/slot/port and Data/Voice VLAN
– DHCP discovery with vendor classification ID and Option 60 and 150 response, and show subnet and DHCP server addresses
– Gateway and DNS server availability and responsiveness
– Ping or TCP port connectivity tests to an unlimited number of user-defined targets

Packet Reflector

The LinkRunner G2 packet reflector mode can be used as a remote device during end-to-end network path performance tests to validate LAN and WAN throughput capabilities up to 1Gbps.

LinkRunner G2 supports packet reflection for:
– OptiView® XG Network Analysis Tablet
– OneTouch™ AT Network Assistant

VLAN Monitor & Packet Capture
The LinkRunner G2 can monitor and show traffic distribution of the top 9 VLANs and capture 2GB of packets at line-rate.

Automated Test Results Management to Link-Live Cloud Service

Serving as a centralized test results and device management system, the complimentary Link-Live cloud service transforms team workflows with the ability to quickly and easily log, document, and report test activity from all LinkSprinter, LinkRunner AT, LinkRunner G2, AirCheck G2, and OneTouch AT hand-held network testers. Once the instrument is connected to the Link-Live Cloud Service, your test results are automatically uploaded to the dashboard for project management and reporting. You have the option of uploading additional files, screenshots, images, profiles, packet captures, location information, and comments anytime. Also, certain NetAlly instruments with AllyCare Support can receive firmware updates “over the network” from Link-Live as they become available.

An API is available to retrieve and integrate data from Link-Live into other management platforms, such as your trouble-ticket application or network management system. This gives you the ability to easily provide proof-of-performance and better manage jobs and staff efficiency.

This unified dashboard of both wired and Wi-Fi network connectivity results enables you to:
– Reduce results management overhead for multiple testers and users
– Enables seamless collaboration between site personnel and remote experts
– Simplify report generation across media types for network deployment documentation
– Attach photos, user comments to each result, adding context for future changes and troubleshooting
– For asset management, ability to associate serial numbers of installed devices, and/or cable/wall jack label to specific test results

Models & Accessories

Model Number/Name Description
LR-G2 Includes: (1) LinkRunner G2 with Li-ION battery, power supply with regional power plugs,  Wireview wire mapper #1, Inline RJ-45 coupler, USB 2.0 to Micro USB cable, 8 G Micro SD card, small soft case, coupler, and Quick Start Guide.
LR-G2-1YS 1 year AllyCare Support for LR-G2
LR-G2-3YS 3 year AllyCare Support for LR-G2
LR-G2-KIT Includes: (1) LinkRunner G2 with Li-ION battery, power supply with regional power plugs,  Wireview wire mappers #1-#6, Inline RJ-45 coupler, USB 2.0 to Micro USB cable, 8 G Micro SD card,  holster, Accessories pouch, IntelliTone™ 200 LAN Probe, medium soft case, coupler, and Quick Start Guide.
LR-G2-KIT-1YS 1 year AllyCare Support for LR-G2-KIT
LR-G2-KIT-3YS 3 year AllyCare Support for LR-G2-KIT
LR-G2-LS-KIT Includes: (1) LinkRunner G2 with Li-ION battery, power supply with regional power plugs, Wireview wire mapper #1, Inline RJ-45 coupler, USB 2.0 to Micro USB cable, 8 G Micro SD card, small soft case, coupler, Quick Start Guide, (2) LinkSprinters, and (2) LinkSprinter holsters.
LR-G2-LS-KIT-1YS 1 year AllyCare Support for LR-G2 and LSPRNTR-300
LR-G2-LS-KIT-3YS 3 year AllyCare Support for LR-G2 and LSPRNTR-300
LR-G2-ACKG2-CBO Includes: (1) LinkRunner G2 with Li-ION battery, (2) Power supplies with regional power plugs, automobile powercharger, Wireview wire mappers #1-#6, Inline RJ-45 coupler, (2) USB 2.0 to Micro USB cable, 8 G Micro SD card, (2) holsters, accessories pouch, IntelliTone™ 200 LAN Probe, soft carrying cases (small, medium, large), (1) AirCheck G2 Wireless Tester, (1) Test Accessory, Quick Start Guides, and external directional antenna.

Accessories

Model Number/Name Description
US-WIFI-BT-USB Edimax n150 Wi-Fi & Bluetooth USB Adapter for US and Canada
EU-WIFI-BT-USB Edimax n150 Wi-Fi & Bluetooth USB Adapter for Europe
LION-REPL-BA Replacement battery for ACKG2 and LRG2
MS-AUTO-CHG MS-AUTO-CHG, Auto Lighter Adapter Accessory
SFP-1000LX SFP-1000LX, LX Gig Fiber DDM SFP Transceiver
PWR-CHARGER PWR-CHARGER, AC Charger Replacement
SFP-1000SX SFP-1000SX, SX Gig Fiber DDM SFP Transceiver
SFP-1000ZX SFP-1000ZX, ZX Gig Fiber DDM SFP Transceiver
SFP-100FX SFP-100FX, 100BASE-FX Fiber DDM SFP Transceiver
G2-HOLSTER Protective carrying  holster with shoulder strap for ACKG2 and LRG2
WIREVIEW 1 Wireview wire mapper #1
WIREVIEW 2-6 Wireview wire mappers #2-#6
SM SOFT CASE Small soft case
MD SOFT CASE Medium soft case
LG SOFT CASE Large soft case

Specifications

General  
Dimensions 3.8 in x 7.7 in x 1.6 in (9.7 cm x 19.6 cm x 4.1 cm)
Weight 18 oz (0.51 kg)
Battery Rechargeable lithium-ion battery pack (3.6 V, 6 Ah, 21 Wh)
Battery Life Typical operating life is 4 hours. Typical charge time is 7 hours.
Display 5.0 in color LCD with capacitive touch screen (480 x 800 pixels)
Keypad 1-key elastometric (power only)
Host Interface Micro USB On-the-Go port
USB Port USB 2.0 Type A port
SD Card Slot Supports Micro SD
Cable Test Pair length, crossed, reversed and distance to open, short, split
Tone Generator Digital tone: [455 KHz]; Analog tones: [400 Hz, 1KHz]
Ports RJ-45 copper port 10/100/1000BASE-T. 100/1000BASE-X. Fiber adapter port. Fiber port supports standard SFP
External AC Adapter/Charger AC input 90-264 Vac 48-62 Hz input power DC output 15 Vdc at 2 amps or RJ-45 via PoE
   
Environmental  
Operating Temperature 32°F to 113°F (0°C to +45°C) NOTE: The battery will not charge if the internal temperature of the tester is above 122°F (50°C)
Operating Relative Humidity (% RH without condensation) 90% (50°F to 95°F; 10°C to 35°C); 75% (95°F to 113°F; 35°C to 45°C)
Shock and Vibrations 1 m drop test, Random, 3.8 grms, 5 Hz-500 Hz (Class 2)
Safety IEC 61010-1:2010: Pollution degree 2
Altitude 4,000 m; Storage: 12,000 m
EMC IEC 61326-1:2013: Basic Electromagnetic Environment; CISPR 11: Group 1, Class A
Group 1: Equipment has intentionally generated and/or uses conductively-coupled radio frequency energy that is necessary for the internal function of the equipment itself.
Class A: Equipment is suitable for use in all establishments other than domestic and those directly connected to a low-voltage power supply network that supplies buildings used for domestic purposes. There may be potential difficulties in ensuring electromagnetic compatibility in other environments due to conducted and radiated disturbances.

 

Additional South Korean EMC Standards Information.

Electromagnetic Compatibility. Applies to use in Korea only. Class A Equipment (Industrial Broadcasting & Communications Equipment) [1]

[1] This product meets requirements for industrial (Class A) electromagnetic wave equipment and the seller or user should take notice of it. This [equipment is intended for use in business environments and is not to be used in homes.

 Sản phẩm cùng loại
LinkRunner® AT – Network AutoTester
 
 
LinkSprinter® Máy kiểm tra mạng bỏ túi
 
 
EtherScope™ nXG
 
 
OneTouch™ AT Network Assistant